The Handy 1938139001, Инструкция по эксплуатации

Страница: 12 / 24

SPLITTING LOGS
Plan your work site. Work safely and save effort by planning your work beforehand. Have your logs
positioned where they can be easily reached. Prepare an area to stack the split wood or load it onto
a nearby truck or other carrier.
•
Prepare the logs for splitting. This splitter accommodates logs up to 104cm in length. When
cutting up limbs and large sections, do not cut sections any longer than 100cm. With 3 support
table positions for splitting for 52cm, 78cm 104cm in length. Insert the support table into the
position nearest the log length, and secure the support table with the locking hook.
•
Apply a thin coat of grease to the surfaces of the ram before operation this will increase the
durability of the ram.
•
Loosen the oil tank cover a few turns to allow air to move freely as described above. Re-tighten
when you have finished splitting
•
Plug in the power cord, ensuring that it does not get in the way of the operating mechanism, and
keep it out of the way of the operator’s feet.
•
Start the motor - the wedge ram should rise to the highest position automatically.
•
If operating in low temperatures, allow the engine to run for 15 minutes to preheat the oil.
DO NOT attempt to split green logs. Dry, seasoned logs split much easier and will not jam the
machine operation as much as green wood.
•
Route the cord from the power source to the splitter in a way that will not cause you to trip over
the cord, or damage the cord during work. Protect the power cord from impacts, pulling or
corrosive materials.