THE GILBERT HALL American Flyer, Инструкция по эксплуатации и сборке

Страница: 48 / 66

Connect the
BLACK
and
RED
wire from the Talking Station
to
the
Connect the
YELLOW
wire to the
15
VOLT POST
on the transformer.
Connect the
GREEN
wire to one of the clips underneath the control box.
Connect the
SHORT BLACK
wire from the other clip underneath
the control box to the
BASE POST
on the transformer.
Next, remove the cork from the needle in the reproducer and attach the
horn to the reproducer neck. Then insert reproducer into the unit. (See the
following diagram)
so
the horn faces away from the motor and the two pins
fit into the slots on the upright brackets and the needle is resting on the
record.
BASE POST
on the transformer.
Now start the train, and as it approaches the station and the insulated
portion of the track, press the control box button, the train will stop at the
station while the train announcer makes his announcement, then with a series
of train noises, the train will automatically start and run until
you
again press
the button for a repeat performance.
NOTE: On a small oval of track do not press the button
a
second time
until the train has made several revolutions and the motor in the station
has come to a stop.
47