THE BOLD LOOK OF KOHLER K-7309, Руководство по установке

Страница: 4 / 20

2. Install the Faucet Assembly
Thread rod of support bracket assembly into saddle on bottom of
spout.
Place a washer inside each stop nut.
Hold faucet body against stops and thread stop nuts onto faucet
body. Hand tighten stop nuts.
Position flange of support bracket against wall so spout is parallel
with floor.
Secure flange using 1-1/2
″
(3.8 cm) screws. Use toggle nuts if
installing on drywall.
Align the spout to face straight forward from the faucet body.
Spout
Saddle
Rod
Faucet
Body
1-1/2" (3.8 cm)
Screw
Stop
Nut
Stop
Nut
Washer
Washer
Flange
113700-2-AB 4 Kohler Co.