- 19 -
Buzzer Setup
Default:
ON
ON:
The printer will sound the buzzer (beep) as a confirmation of
most events.
OFF:
The printer will only sound the buzzer (beep) when there is a
condition that requires the operator’s attention.
Smart BackFeed
Default:
OFF
When in stripper, applicator, or cutter mode, a label is printed and moved
forward to be peeled off, taken by applicator or cut. If Smart Backfeed is
ON, the next label will be partially printed so the printer does not have to
backfeed to find the original starting point when printing continues.
ON:
Turns smart backfeed on.
OFF:
Turns smart backfeed off.
Password
Default:
OFF
ON:
Allows user to set a password to restrict setup changes. The Printer
will prompt for a pa
ssword message before entering Setting Mode when
password protection is enabled.
OFF:
Allows any user to change setup selections.
Top Of Form
Default: ON
Enables or disables the top of form feature in the printer. This feature
tells the printer to either feed a blank label (ON) or immediately start
to print without first feeding a blank label (OFF) upon power up or
after opening and closing the Printhead.
ON:
Printer will
feed a blank label.
OFF:
Printer will
immediately start to print without first feeding a
blank label
.
Ethernet
‘Go to Default’ is the only option. (O
ther options may be added in the future.
)
Pressing the FEED Key will reset the optional Ethernet Module to factory
default settings.
Preview
Press Enter to select the Preview option. Press the Next Key to scroll
through the list of configuration options.
