- 17 -
For Menu Items that are a list of
selectable
options,
the
first
line
indicates the current item and the
second line indicates current setting.
Press the FEED/ENTER Key to
select the displayed value for
this Menu Item.
Press the PAUSE/NEXT Key to
move to the next available
selection for this Menu Item.
Press CANCEL/EXIT to go back
to the Setting Mode Menu.
For Menu Items that are adjustment
settings, the first line indicates the
current item and the second line
indicates current value.
Press the
/CANCEL Key to
increase the value.
Press the
/FEED Key to
decrease the value.
Press the
/PAUSE Key to go
to next Menu Item.
3. Before exiting Setting Mode, the Printer will prompt the user if the settings should be saved or
not.
4. After user’s response, on whether or not to save the settings, the Printer will return to
Standby Mode.
Menu items and available options in Setting Mode
NOTICE!
“Default Setting” is the value of the setting as delivered from the factory.
Any changes made in Setup Mode are saved after the Printer is turned off.
Darkness
Default: 2
Sets the print darkness. Range is 0 to 19.
Speed
Sets the print speed. Range varies based on the printer.
Adjust Stop Position
Default: 4
Adjusts the final stop position and is used to help make up for
mechanical differences between two printers. This value is added to
the value sent with the ^Ex command to adjust the stop position of
printing. The range is from 0 to 10.
Printhead
Position
Default: 0
Defines the location of the print image on the label.
Range is –100 to +100 (hundredths of inches) (-.254mm - .254mm).
Positive values cause the print image to be moved to the trailing edge of the
label.
Printing Mode
Default: Thermal Transfer
Thermal Transfer:
When printing, a ribbon must be installed to
transfer the image onto the media.
Direct Thermal:
When printing, no ribbon is necessary; requires
direct thermal media.
