5
Instructions for Use & Recipe Booklet
Instructions for Use
Place the cutting lid on the collecting container. Lift cutting top to insert the
blade required. Feed it into the cutting top so that the slightly rounded
narrow side of the blade insert is positioned in the corresponding recess in
the frame of the cutting base. Then push down the other side of the blade
insert until you hear a “click”. The blade insert is now securely locked in
place.
Place the food to be cut on the required cutting surface. For large pieces or
those to be cut in an upright position, hold the food in place with your hand
and press lightly on the cutting top so that the food cannot slip.
If you wish to use both of the cutting surfaces at the same time, the (small)
detachable pin block must be put in place fi rst (see “Inserting the detachable
pin block and cutting stamp”). If you only wish to use one cutting surface
without inserting the detachable pin block, the cutting surface required
must be in position 1.
Push down fi rmly on the cutting top with both hands. The food is pushed
through the blades, cut into even dice, batons or slices (depending on the
blade insert) and automatically collected in the collecting container. If you
have locked one or both of the pins in the cutting top, the lid will open
automatically.
To remove the cut food, simply lift the entire cutting lid (cutting top and
base) on one of the shorter sides and remove. Hold the collecting container
with the other hand as you do so.
3.1 Blade inserts with 2 different cutting surfaces
The blade inserts have 2 different cutting surfaces, referred to as position 1
and 2 in these Instructions for Use (see figure). Food can be cut on both sur-
faces and it is possible to cut two different ingredients at the same time. The
following should be noted in this connection:
If one of the ingredients to be cut is
harder
than the other, place the
harder one in
position 1
(greater leverage).
If one of the ingredients to be cut is
larger
than the other, place it in
position 2
(longer lever travel).
Position 1
Position 2
Figure:
Содержание Nicer Dicer FUSION
Страница 40: ...40 Instructions for Use Recipe Booklet Recipes...
