Thames & Kosmos Remote Control Machines, Инструкция

Страница: 25 / 48

25
Model 6 Bulldozer II |
REMOTE-CONTROL MACHINES
1
2
3
4
Size (cm) : 39 (L) x 14.5 (W) x 18.5 (H)
How to Operate
：
1. Turn on the switch on
the remote controller.
2. Touch the touch pad
3 on the remote
controller briefly at
first and then the
touch pad 1 so that
the bulldozer will turn
slightly counterclockwise at first and then head forward.
3. Touch the touch pad
2
to turn the blade clockwise and the touch pad
5
to turn it counterclockwise.
Challenge
：
●
The gears, wheels, and drive chain must be kept at least 1 mm away from
each other or from the frame so that they can turn smoothly.
●
Use the end of the part separator tool marked with "A" to pry up the pin.
●
If the motor doesn’t work, check to make sure the wire connector of the
motor and the output of the receiver/battery holder are well connected,
or that the batteries are not dead.
1
3
4
6
2 5
1
2
5
4
3 6
Tips for Assembly ：
Make a goal area with some
other building blocks or
some cardboard pieces
(not included in this kit) as
shown here.
Use the remote
controller to move
blocks into a des-
ignated area with
the blade of the
bulldozer.
555004 Booklet Final 2015.indd 25 6/21/16 9:42 AM