Thames & Kosmos Remote Control Machines, Инструкция

Страница: 14 / 48

14
Size (cm) : 23 (L) x 12 (W) x 46 (H)
REMOTE-CONTROL MACHINES
| Model 3 Crane
1
2
3
4
5
6
●
Press the gear A downward and gear B upward to
hold the 80T Gear in place.
●
The wheels and the drive chain must be kept 1 mm
away from the frame so they can turn smoothly.
●
Use the end of the part separator tool marked with
"A" to pry up the anchor pin.
●
If the motor doesn’t work, check to make sure the wire connector of the motor and the output
of the receiver/battery holder are well connected, or that the batteries are not dead.
4
6
1
3
5
2
1
3
4
6
2
5
How to Operate ：
1. Turn on the switch on the remote controller.
2. Touch the touch pad
2 or 5 on the remote controller to lower down or lift
up the long crane arm. Don't lift it up higher than 90 degrees.
3. Touch the touch pad 3 or 6 to turn the 80T gear clockwise or counterclock-
wise. Don't turn it more than 270 degrees or the wire will get twisted up.
4. Touch the touch pad 1 or 4 to drive
the crane forward or backward.
Tips for Assembly
：
A
B
555004 Booklet Final 2015.indd 14 9/21/15 10:17 AM