Thames & Kosmos Remote Control Machines, Инструкция

Страница: 18 / 48

18
REMOTE-CONTROL MACHINES
| Model 4 Bulldozer
Size (cm) : 32 (L) x 16 (W) x 21 (H)
1
2
5
6
7
8
3
4
Make a goal area with some
other building blocks or
some cardboard pieces
(not included in this kit) as
shown here.
How to Operate ：
1. Turn on the switch on
the remote control-
ler.
2. Touch the touch pad
3 on the remote
controller briefly at
first and then the
touch pads 3 and 1 together at the same time so that the bulldozer will turn slightly clockwise
at first and then head forward.
3. Touch the touch pad
2
to raise the blade and the touch pad
5
to lower it back down. Don't raise
the blade higher than 90 degrees.
Challenge
：
Use the remote
controller to move
blocks into a des-
ignated area with
the blade of the
bulldozer.
●
The gears and wheels on the drive axles must be kept 1 mm away
from the frame so that they can turn smoothly.
●
Use the end of the part separator tool marked with "A" to pry up
the anchor pin.
●
If the motor doesn’t work, check to make sure the wire connec-
tor of the geared motor and the output of the receiver/battery
holder are well connected, or that the batteries are not dead.
1
3
4
6
2 5
1
3 6
3
1
+
6
4
+
4
Tips for Assembly ：
555004 Booklet Final 2015.indd 18 9/21/15 10:17 AM