Getting Started with LTE Modem Cards
2.3 Start Up the Module
16
mPLS62_mPLS8_mPLAS9_startup_guide_v02
2019-07-12
Confidential / Released
Page 12 of 17
With PLAS9-W for example, Service Set 2 is configured as delivery default:
•
the MDM service is available at the USB0 interface (CDC ACM LTE USB Modem port)
•
the APP service is available at the USB1 interface (CDC ACM LTE USB serial port 1)
The AT command AT^SQPORT shows whether the MDM or APP service is connected to the
device interface the command was sent over.
The two USB devices implemented as USB CDC ECM wireless network adapters are activated
and deactivated by the AT command AT^SWWAN. Via the two WWAN or RmNet adapters dif-
ferent APNs can be assigned and used simultaneously.
For further details and more information on the above AT commands to configure and operate
the module please refer to
Figure 5:
Installed USB devices mPLS62-W
mPLS62-W:
The two USB devices implemented as USB CDC ECM network adapters are activated and de-
activated by the AT command AT^SWWAN. Via the two WWAN or RmNet adapters different
APNs can be assigned and used simultaneously.
With the AT command AT^SSRVSET the two USB CDC ECM network adapters can be
changed to one USB CDC MBIM (Mobile Broadband Interface Model) interface.
For further details and more information on the above AT commands to configure and operate
the module please refer to
