manualshive.com logo in svg

Thales CGRS, Руководство пользователя, Страница: 132 / 160

Поделиться
Скачать
Thales CGRS Скачать руководство пользователя страница 132

118

ProMark2 User’s Guide

Site Description Screen

The 

Site Description

 screen,  Figure 4.11, can be accessed from the 

Point Attribute

 screen 

when the 

Site Description

 field is highlighted and the 

Enter

 key is pressed. 

The 

Site Description

 screen lets you select a descriptor from the descriptor list, enter a new 

descriptor, edit an existing descriptor, and delete a descriptor.  The descriptor can be 20 
characters in length. The site description table allows up to 16 site descriptors on the list. The 
default value <Empty> will always be available in the list.  <Empty> will allow you to set the 
site descriptor field to an empty string.  Table 4.8 describes the screen parameters.        

 Figure 4.11   

Site Descriptor Screen

 Table 4.8   

Site Descriptor Screen Parameters

Parameter

Description

Save

Saves the data entry, sets the highlighted descriptor in the 

Site Descriptor

 field in the 

Point Attribute

 screen, and returns the program to the 

Point Attribute

 screen.

New

Calls the 

Description Edit

 screen where you can enter a descriptor up to 20 characters 

in length.  This field is no longer selectable when 16 descriptors are in the table.

Edit

Calls the 

Description Edit

 screen where you can modify the highlighted descriptor.

Delete

Deletes the highlighted descriptor.  Descriptors can only be deleted one at a time.

Note:  Press the 

ESC

 button to cancel changes and return to the 

Point Attribute

 screen. The table is saved 

after a power cycle with all entries in the 

Site Description

 screen that have been saved.  Save button has been 

pressed.

Содержание CGRS

































































































































































Отзывы:

Нет отзывов