Notes:
01. Read the installation manual
11. Some models are not suitable for
carefully before installation and
drinking water.
use.
12. The liquid may be high-temperature
02. The manufacturer will not be liable
and high-pressure; therefore, the
for any personal injury, pump
liquid in the system must be
damage and other property
completely drained or the shut-off
damage due to failure to comply
valves on both sides must be
with safety warnings
closed
before
moving
and
dismantling the pump to prevent
a burn hazard.
03. The installers and operators must
comply with local safety regulations.
13. If removing the exhaust bolt, high-
temperature and high-pressure
liquid will be released.
Measures
must be taken to safely contain
any released liquid.
04. The user must confirm that only
qualified
personnel
with
professional certification
and
proficiency of this manual are
permitted to install and maintain this
product.
05. The pump is rated Ip44 and must not
be installed in a place that is damp or
may be splashed by water.
14. Ventilation must be ensured in
summer
or high
ambient
temperature conditions to avoid
condensation that may cause
electrical malfunctions.
06. For convenient
access of
maintaince, a shut-off valve shall be
installed on each side of the pump
15. If there is a risk of frost damage,
install a frost protection thermostat,
or drain down the system in order
to avoid frost damage to the pump
body.
07. The power supply of the pump must
be disconnected before installation
andmaintainace.
08. For domestic hot water, copper or
stainless steel pump body shall be
used.
16. If the pump is left unused for a long
time, please close the pipe valve in
the inlet and outlet of the pump and
disconnect the power supply.
17. If the flexible cord of
cable is
damaged, it must be replaced by a
qualified person.
18. Please close the valve at the inlet of
the pump and disconnect power of the
pump immediately if overheating
10. Do not start the pump without
liquid.
01
APUMP-HE
09. In hard water areas use
appropriate water treatment
additives to prevent calcium
deposits, which can block
pipelines and / or the pump
impeller.
Содержание Tower APUMP-HE Series
Страница 9: ...5 Electrical Connection 08 APUMP HE ...
