13
Specifications:
Measurement Range Infrared:
-60 to +500 °C
(-76 to +932 °F)
Measurement Range
Thermocouple:
-64 to +1400 °C
(-83.2 to +2552 °F)
Infrared Accuracy Infrared:
+2% of reading or +2 °C
which is greater
Infrared Accuracy
Thermocouple:
+1% of reading or +1 °C
which is greater
Operating Range
0 to +50 °C (32 to 122°F)
Storage Range:
-20 to +65 °C
(-4 to 149oF), 95%RH
Response Time:
1sec
Distance to Spot size:
5:1
Emissivity:
0.10~1.00 step0.01
Update Frequency:
1.4Hz
Mode:
MAX, MIN, dIF, AVG, HAL,
LAL, PRB, Lock
Battery Life:
Typ. 360, min 270 hours
continuous use*
Dimensions:
30 x 42.9 x 138 mm
Weight:
137 grams including
batteries (AAA*2pcs)
* without Laser and Back Light.
Note: Subject to change without notice.
ScanTemp 440 – Infrared Thermometer
ScanTemp 440 – Infrared Thermometer
12
Cleaning and Storage:
• The ScanTemp 440 should be stored at room tempera-
ture between –20 to +65°C.
• The lens should be kept clean at all times.
• The sensor lens is the most delicate part of the ScanTemp.
The lens should be kept clean at all times, care should be
taken when cleaning the lens using only a soft cloth or
cotton swab with water or medical alcohol, allowing the
lens to fully dry before using the ScanTemp 440.
Trouble Shooting:
➞
‘Low Battery’
icon indicates the battery is low.
➞
The battery should be replaced with
2x AAA (LR6), 1.5V batteries immediately.
➞
Please check the model with/without this
function.
➞
Replace the batteries:
➞
‘Hi’ is displayed when the temperature being
measured is outside of the settings of HAL.
➞
Please reset the HAL or select target within
specifications.
➞
’Lo’ is displayed when the temperature being
measured is outside of the settings of LAL.
➞
Please reset the LAL or select target within
specifications.
➞
For all other error messages it is necessary
to reset the ScanTemp 440.
➞
To reset the ScanTemp 440, please wait the
instrument automatic off, remove the battery
and wait for a minimum of one minute, re-
insert the battery and turn on.
➞
If the error message remains please contact
the Service Department for further assistance.
don’t work
HI
LOW
DE Anl. 5020-0504/SCANTEMP 440 11.01.2005 15:18 Uhr Seite 7
