Greenlee / A Textron Company
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
HK520 Hydraulic Cable Cutter
IMPORTANT SAFETY INFORMATION
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning will
result in severe injury or death.
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury
or property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for
preventing or avoiding the hazard.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Hazards which, if not avoided, COULD result in
severe injury or death.
Immediate hazards which, if not avoided, WILL
result in severe injury or death.
SAFETY
ALERT
SYMBOL
• Electrical Shock Hazard: The owner of this cutter
must be certain that all users of this tool are
trained in the applicable safety codes and
standards, as well as, in the safe use of this tool
and its accessories.
• Do not cut cable under tension.
• This tool is intended for two-handed operation.
Maintain a firm grip on both handles during
operation.
Failure to observe these warnings could result in
severe injury or death.
Electrical Shock Hazard: This tool
is not insulated. Use protective
equipment when utilizing this unit
near energized electrical lines.
Failure to observe this warning
could result in severe injury or
death.
