915FS Splicer
Greenlee / A Textron Company
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
21
Splice Mode Menu (S–Mode)
(1) Select Splice Mode
Select “S–Mode” to access the available splicing modes. Use
p
and
q
to highlight the
desired splicing mode. Then press
8
to confirm.
Select an appropriate splice mode for the type of fiber to be spliced, and press
p
or
q
to select the splice mode. Then press
8
to confirm.
Note: “1 AUTO SM/NZ/DS/MM” mode is recommended for splicing in most cases. In
this mode, the splicer automatically adjusts splice parameters according to the fiber
type.
(2) Edit Splice Mode
Splicing parameters in each splice mode can be modified.
In “Select Splice Mode” menu, press
u
to enter “Edit Splice Mode” and modify the
splice mode as shown below.
Press
p
or
q
to select the parameter to be modified, and then press
8
to enter the
parameter setting.
Press
p
or
q
to modify the parameter, and then press
8
to confirm.
