Textron Cessna 172R, Руководство по эксплуатации для пилотов

Страница: 421 / 500

CESSNA
MODEL 172R
SECTION 9 - SUPPLEMENTS
SUPPLEMENT
9 -
FAA APPROVED
r
f
CLOCK
OPERATIONS
The lower portion of the LCD window is dedicated
to clock and
timing operations. Pushing the SELECT button will sequence the
window
from universal time (UT)
to
local time (LT)
to
flight time (FT)
to
elapsed time (ET), and back again
to
universal time. Pushing the
CONTROL button allows for timing functions within the
four
SELECT menus. Setting procedures are as
follows:
SETTING UNIVERSAL TIME
Use the SELECT button
to
select universal
time (UT).
Simultaneously press
both the SELECT and the CONTROL
buttons
to enter
the
set
mode. The
tens
of hours
digit will
start
flashing. The
—
i
CONTROL button has full control
of the flashing digit, and
each
r'
button push increments
the
digit. Once
the tens of hours is
set the
SELECT button selects the
next
digit
to be
set.
After the last digit
has
been selected and
set
with the CONTROL button, a
final push
of
the SELECT button exits the
set
mode. The lighted annunciator
|
JP*S
will
resume its normal flashing, indicating the clock is running
in
t
universal time
mode.
SETTING LOCAL TIME
f!iPN
Use the SELECT
button
to
select local time (LT).
Simultaneously press both the SELECT and the
CONTROL
buttons
to enter
the
set
mode.
The
tens of
hours
digit will start flashing. The
set
operation is the same as for UT,
except that minutes are
already
synchronized with the UT clock and
cannot
be
set
in local
time.
FLIGHT
TIME RESET
Use the SELECT button
to select flight time (FT). Hold the
CONTROL
button down
for 3 seconds, or until
99:59
appears on
the display. Flight time
will be zeroed upon release
of
the
CONTROL button.
Feb
28/00
S9-5
All manuals and user guides at all-guides.com
all-guides.com