Textron 070544, Инструкция по безопасности, эксплуатации и техническому обслуживанию/Список запасных частей

Страница: 43 / 134

en-43
5 CONTROLS AND DISPLAYS
5.2.Z.56 WARNING OIL-PRESSURE FAULT ____________________________________
When this screen is shown, the engine oil pressure has decreased below the normal level. If this happens during operation, Stop
the engine and check the oil level. Top up if necessary. If the problem persists consult your
service dealer.
Press the button below the

to confirm the fault.
5.2.Z.57 WARNING CLEAR RADIATOR SCREENS
When this screen is shown, the engine temperature has risen above the normal levels.
Park the machine in a safe area disengage cutting units, set engine to idle to allow engine
temperature to decrease prior to switching off the engine.
Clean the radiator and screens of all grass and debris.
Press the button below the

to confirm the fault.
5.2.Z.58 WARNING ENGINE FAULT ___________________________________________
When this screen is shown, there is an engine fault.Stop the engine as soon as possible and contact your service dealer.
When this fault occurs the machine go’s into limp-home mode.
Press the button below the

to confirm the fault.
NOTICE
The number in the top right of the screen indicates the total number of current faults recorded. If more
than one fault, it will cycle all current faults.
1
!
CLEAR BUG
SCREEN
1
!
OIL PRESSURE
FAULT
1