TEXIO PU100-7.5, Инструкция по эксплуатации

Страница: 9 / 74

III
PARTS SUBSTITUTIONS & MODIFICATIONS
Parts substitutions and modifications are allowed by authorized TEXIO service personnel only. For repairs
or modifications, the instrument must be returned to TEXIO service facility.
ENVIRONMENTAL CONDITIONS
The PU power supply series safety approval applies to the following operating conditions:
*Indoor use
*Ambient temperature: 0℃ to 50℃
*Maximum relative humidity: 90% (no condensation)
*Altitude: up to 3000m
*Pollution degree 2
CAUTION Risk of Electrical Shock.
Instruction manual symbol. The instrument will be marked with this symbol when it is
necessary for the user to refer to the instruction manual.
Indicates hazardous voltage.
Indicates ground terminal.
Protective Ground Conductor Terminal
Off (Supply)
On (Supply)
WARNING
The WARNING sign denotes a hazard. An attention to a procedure is called.
Not following procedure correctly could result in personal injury.
AWARNING sign should not be skipped and all indicated conditions must be fully understood
and met.
CAUTION
The CAUTION sign denotes a hazard. An attention to a procedure is called. Not following
procedure correctly could result in damage to the equipment. Do not proceed beyond a
CAUTION sign until all indicated conditions are fully understood and met.
FCC COMPLIANCE NOTICE:
Note: This equipment has been tested and found to comply with the limits for a ClassA digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.