Texi joylock 2/4, Руководство пользователя, Страница: 75 / 136

Texi Joylock 2/4 75
EN
ADJUSTING STITCH LENGTH
ADJUSTING OVEREDGE CUTTING WIDTH
Turn the stitch length dial until the
required length is indicated.
The higher the number, the longer
the stitch. This dial can adjust the stitch
length from 1 to 5 mm.
Overedge cutting width can be adjusted from 4 to 7 mm by simply turning
overedge cutting width dial according to the kind of fabric.
It is set at standard width of 6 mm when delivered from the factory.
Turn it towards “5” if fabric edge curls while sewing.( Fig.1)
Turn it toward “7” if loops hang off the edge. (Fig.2)
Left needle thread loose
and visible on
under side of fabric.
Right needle thread loose
and visible on
under side of fabric.
Increase right needle thread
tension.
Increase left needle thread
tension and/or
decrease either or both
looper threads.