2
INS647-3
1
2
3
Remove the top cap and loosen screw
(screw retained in wall plate).
Push up head unit and remove.
Use a flat head screwdriver to lever out
both sides of the battery cover.
1. Accessing the unit & battery installation
4
Start the learn process on the keypad and then insert the
batteries - Battery connection will automatically start the
learning sequence. Device reverts back to programmed
network if receiver is not in learn mode (when replacing
battery).
LEARN THE DEVICE TO THE SYSTEM BEFORE MOUNTING.
When in Auto Mode, devices poll at 15 minute intervals.
Following activation, devices will not transmit the same
activation again for a period of 3 mins.
For wireless connectivity, detailed programming and
system set-up instructions please refer to the compatible
Ricochet
mesh technology enabled Premier Elite wireless
expander or control panel manual.
