Texecom Premier Elite AMDT, Инструкция по эксплуатации

Страница: 16 / 52

INS542-5 16/52
functionality of the circuitry. Setting SW4 to off can disable this function. If the test
is passed no indication is shown but if it fails then a fault will be signalled to the
panel and the orange LED lit (if enabled). The fault will remain until a local or
remote test is passed.
Remote Self-Test
This test is initiated at the control panel. If the test is passed then the detector will
signal an alarm. If the test fails then the detector will signal a fault. The fault will
remain until a local or remote test is passed. There is a dedicated control type for
this output on Texecom Premier panels, expanders and keypads for ease of
installation. For more information on setting up an output to run this test please
see the relevant manual.
8. Altering Coverage (at 2m Mounting height)
9. Bracket installation (Brackets available separately, Part No.
AFU-0004-2) Not for use in a Grade 3 system
Regulatory information
Supplier: Texecom Ltd, St. Crispin Way, Haslingden, Lancashire, BB4 4PW, UK.
CE Marking: Hereby, Texecom
declares that this device is in
compliance with the essential
requirements and other relevant
provisions of EU Directives.
Weee Directive: Products marked with
this symbol cannot be disposed of as
unsorted municipal waste in the
European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at
designated collection points. For more
information see:
www.recyclethis.info .
RoHs Directive: Hereby, Texecom declares that this device does not contain
lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or