Premier Elite 5Ci-W Internal
Installation Manual
INS655-3
5
Rear Tamper
A Screw must
be used here
Installing The Cover
Commissioning
Once the installation is complete the sounder should be tested to confirm correct operation. This can be achieved by utilising the
Bell/Strobe test facility in the "Engineer Utilities" menu.
Technical Specification
Environmental
Electrical
Volume
105dB Peak at 1m (A Weighting, 90
)
Supply Voltage:
12V DC
Battery Type:
8 x Lithium type AA 1.5V
High Power LED Strobe:
320lm
Acoustic Output
Varying Sound Output
Flash Rate:
1Hz (typical)*
Cut-Off Time:
15 minutes or
3 minutes(selectable)
Waterproof Coating:
Conformal
Comfort LEDs:
Environmental Protection
N/A
Brightness:
100mcd (typical)
Flash Rate (tamper
secure):
1/4 sec flash at 5 sec intervals alternating
(typical)
Wireless Frequency:
868.0MHz – 868.6MHz
Operating Temperature:
-25
C (-13
F) to +55
C (+131
F)**
Storage Temperature:
-25
C (-13
F) to +60
C (+140
F)
EMC Environment:
Residential
/
Commercial
/Light
Industrial / Industrial
*
The flash rate will reduce to 0.125Hz after flashing for 20 minutes (1 flash every 8 seconds). This is a software feature to reduce power consumption and
cannot be disabled. After 10 days the strobe is cancelled completely. Turning the strobe off then on again will resume normal operation.
** In extreme conditions where the temperature is likely to exceed the stated maximum avoid direct sunlight.
Physical
Material
3mm polycarbonate
Packed Weight
835g (30oz) approx
Tamper Detection
Wall & Lid
Dimensions (h x w x d)
189 mm x 186 mm x 60 mm
