Texas HP 140, Руководство пользователя

Страница: 23 / 36

Troubleshooting
Disconnect from the electrical power supply before maintenance or inspection.
Please ensure the following before contacting the service organization:
Problem Possible cause Recommended action
Machine
won’t
start

Power supply not plugged in

Fuse is blown

Corrupt extension cord

Insert power supply to socket

Replace fuse. Unplug other
machines connected to the circuit

Try without the extension cord.
Unstable
pressure

Air in pump and hose

Dirty, worn filter

Leaking gasket or hose

Check that hose and connection is
airtight and sealed.

Clean and replace filter or contact
distributor

Clean and replace gasket or contact
distributor
Machine
shuts
down

Fuse has blown

Thermal sensor activated

Nozzle partially blocked

Replace fuse. Unplug other
machines connected to the circuit

Let the machine cool down for 5 min

Clean the nozzle
Machine
pulsating

Air in inlet hose

Fluctuating water pressure

Nozzle partially blocked

Water filter blocked

Hose twisted

Allow machine to run with open
trigger until regular working pressure
resumes.

Check the water pressure source

Clean the nozzle

Clean the filter

Straighten hose.
Machine
starts, but
no water
comes out

No water supply

Water filter blocked

Nozzle blocked

Connect inlet water.

Clean the filter

Clean the nozzle
For further information please contact your distributor.