Texas HP 140, Руководство пользователя

Страница: 20 / 36

Caution: Ensure that the electrical supply voltage and frequency (Volt/Hz) correspond to those
specified under technical specifications
Operation
Note: The motor only runs when the trigger is pressed
Operating the nozzle

Water pressure can be adjusted

Water jet can be adjusted in different variation
Open the water supply before adjusting the pressure and the jet.
Adjusting the water pressure on HP140 Adjusting the water jet on HP140
The pressure can be adjusted from low to high. The jet can either be thin or wide.
Adjusting the water pressure on HP170 Adjusting the water jet on HP170
The pressure can be adjusted from low to high. The jet can either be thin or wide
1. Turn on the water
2. Release the safety on the spray
gun. Pull the trigger and hold to
discharge remain pressure and air
left in the hose
3. Hold the trigger and turn the switch
to start position
4. Always keep the trigger pressed
when starting the motor