5.10
Date and time setup with the Web monitor
When you acquire the system, it is important to verify that the date and time are correct. If they
are incorrect, you can use the Web monitor to change them.
From the Web monitor, expand the “
Management
” tree under the system node. This will
expose several sub-nodes.
Highlight “
Date/Time
.” This will display the current date and time as well as the amount of
time the system has been up.
Figure 8: Web Monitor Date and Time Management
If the date and time are incorrect, you can set them manually. Either right-mouse click and select
“
Date/time configuration. . .
” or left-mouse click the wrench icon in the button bar — both
methods bring up the Date/Time configuration window. Follow the instructions in this wizard to
configure the date and time or specify an NTP (Network Time Protocol) server to supply this
information.
RamSan-810 User’s Manual
- 25 -
Texas Memory Systems, Inc.
