5.5
Network Configuration with the Front Panel
Display
The RamSan-810 allows system monitoring and configuration through the installed Ethernet
port. To access the system’s Ethernet port you will need to provide it with an IP address, subnet
mask, and possibly a gateway address. The administrator may assign the IP address in one of
three ways: Static IP, DHCP, or No Ethernet. The default factory setting is DHCP.
For any questions regarding IP assignment values, please consult your network administrator.
To set up the network via the front panel, use the arrow buttons to cycle through the top-level
menu options until the display shows “
Net Config
.” Use the
Select
button to choose this option
and continue with the configuration. You may now use the arrow buttons to scroll through the
following menu options:
Displays a list of the current IP configuration, host-
name, IP address, subnet mask, gateway address (if
applicable), and hardware MAC address for each Eth-
ernet port.
Net Config
Show Current
Configure the Eth0 Ethernet port.
Net Config
Eth0 Config
Shuts down and restarts the Ethernet port using the
current IP assignment configuration.
Net Config
Restart Net
Exits the network menu.
Net Config
Exit Menu
To continue setting up the Ethernet configuration, select “
Eth0 Config
.”
RamSan-810 User’s Manual
- 15 -
Texas Memory Systems, Inc.
