4.2
Configuring System Date and Time
The RamSan uses the system date and time to update the event log. This
feature aids in troubleshooting.
4.2.1
Set Date and Time
Via Web Interface
To change the system date and time via the web interface:
•
Click on the “Management Control Processor” graphic
•
Click the “General Config” tab
•
Enter the date and time under the “New time/date” field.
•
Click the “Save” button
The system immediately changes the date and time. The new time
appears next to “Current time/date.”
Figure 4-5: Date/Time Change via Web Management Interface
RamSan-120
User’s Manual
- 23 -
