TPS61177AEVM Component Placement
www.ti.com
Figure 8. TPS61177A EVM Test Setup With USB2ANY Connected for Software Control
The USB2ANY Board can be connected to the TPS61177AEVM via J8 connector. The USB2ANY Board
provides all of the control signals for the simple interface. Power to the part must be provided externally. A
standard USB cable must be connected to the USB2ANY board from a PC. The default jumper connection
of JP1 (EN) and JP9 (PWM) can be removed to use software control to enable and light up the board. J17
and J18 should be connected for software control of EN and PWM. PWM signal from USB2ANY is just on
(100%) /off (0%) signal for simple bring-up test for the board.
3
TPS61177AEVM Component Placement
Figure 9
shows the top PCB layer of the TPS61177A EVM.
20
List of Tables
SNVU490 – OCTOBER 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
