Set-Up
www.ti.com
2.2
TPS61177AEVM Set-Up
Figure 2. TPS61177AEVM With USB2Any Board Connected
External power must be provided to the board. A standard USB to mini USB cable must be connected to
the USB2ANY from a PC. The I2C-compatible interface program provides all of the controls that the
TPS61177A device requires.
For proper operation:
•
- USB2ANY should be plugged into the PC before the interface program is opened.
•
- Install and execute the GUI program – installation guide will be followed below.
•
- Power the evaluation board
2.2.1
Installation Guide for GUI Program (Windows7-Compatible)
•
Execute setup_TPS61177A_EVM.exe file : If it is compressed in zip file format, unzip first in any
location.
•
Select “Run” though Windows security warning message appears
6
List of Tables
SNVU490 – OCTOBER 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
