www.ti.com
5.84 Port n Attributes Error Capture CSR 0 (SPn_ERR_ATTR_CAPT_DBG0)
SRIO Registers
Each of the four ports is supported by a register of this type (see ). The port n attributes error capture CSR
0 (SPn_ERR_ATTR_CAPT_DBG0) is shown in
Figure 147
and described in
Table 163
.
Table 162. SPn_ERR_ATTR_CAPT_DBG0 Registers and the Associated Ports
Register
Address Offset
Associated Port
SP0_ERR_ATTR_CAPT_DBG0
2048h
Port 0
SP1_ERR_ATTR_CAPT_DBG0
2088h
Port 1
SP2_ERR_ATTR_CAPT_DBG0
20C8h
Port 2
SP3_ERR_ATTR_CAPT_DBG0
2108h
Port 3
Figure 147. Port n Attributes Error Capture CSR 0 (SPn_ERR_ATTR_CAPT_DBG0)
31
30
29
28
24 23
INFO_TYPE
Reserved
ERROR_TYPE
IMP_SPECIFIC
R-00
R-0
R-00000
R-00000h
4 3
1
0
IMP_SPECIFIC
Reserved
CAPTURE_
VALID_INFO
R-00000h
R-00
R/W-0
LEGEND: R/W = Read/Write; R = Read only; -n = Value after reset
Table 163. Port n Attributes Error Capture CSR 0 (SPn_ERR_ATTR_CAPT_DBG0) Field
Descriptions
Bit
Field
Value
Description
31–30
INFO_TYPE
Type of information logged
00b
Packet
01b
Control symbol (only error capture register 0 is valid)
10b
Implementation specific (capture register contents are
implementation specific)
11b
Reserved
29
Reserved
0
This read-only bit returns 0 when read.
28–24
ERROR_TYPE
00000b–11111b
Encoded value of captured error bit in the Port n Error Detect
Register
23–4
IMP_SPECIFIC
00000h–FFFFFh
Implementation Dependent Error Information
3–1
Reserved
0
These read-only bits return 0s when read.
0
CAPTURE_VALID_INFO
Valid information captured
0
The packet/control symbol capture registers do not contain valid
information.
1
The packet/control symbol capture registers contain valid
information. For control symbols, only capture register 0 contains
meaningful information. A software write of 0 clears this bit and
subsequently unlocks all the capture registers of the port.
SPRUE13A – September 2006
Serial RapidIO (SRIO)
223
Submit Documentation Feedback