www.ti.com
SRIO Registers
Table 151. Logical/Transport Layer Error Detect CSR (ERR_DET) Field Descriptions (continued)
Bit
Field
Value
Description
25
MSG_REQ_TIMEOUT
Message request timeout (endpoint device only)
0
A timeout has not been detected by RXU.
1
A timeout has been detected by the RXU. A required message request has not
been received by the RXU within the specified time-out interval. To clear this
bit, write 0 to it.
24
PKT_RSPNS_TIMEOUT
Packet response timeout (endpoint device only)
0
A timeout has not been detected by an LSU or the TXU.
1
A timeout has been detected by an LSU or the TXU. A required response has
not been received by the LSU/TXU within the specified timeout interval. To
clear this bit, write 0 to it.
23
UNSOLICITED_RSPNS
Unsolicited response (switch or endpoint device)
0
An unsolicited response packet has not been received by an LSU or the TXU.
1
An unsolicited response packet has been received by an LSU or the TXU. To
clear this bit, write 0 to it.
22
UNSUPPORTED_TRANS
Unsupported transaction (switch or endpoint device)
0
The MAU has not received an unsupported transaction.
1
The MAU has received an unsupported transaction. That is, the MAU received
a transaction that is not supported in the destination operations CAR. To clear
this bit, write 0 to it.
21–8
Reserved
0
These read-only bits return 0 when read.
7
RX_CPPI_SECURITY
RX CPPI security error
0
The RXU has not detected an access block.
1
The RXU has detected an access block. That is, access to one of the RX
queues was blocked. To clear this bit, write 0 to it.
6
RX_IO_DMA_ACCESS
RX I/O DMA access error
0
A DMA access to the MAU has not been blocked.
1
A DMA access to the MAU was blocked. To clear this bit, write 0 to it.
5–0
Reserved
0
These read-only bits return 0 when read.
SPRUE13A – September 2006
Serial RapidIO (SRIO)
211
Submit Documentation Feedback