Texas Instruments MSP430CG4616IPZ Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 112

background image

MSP430xG461x

MIXED SIGNAL MICROCONTROLLER

SLAS508I − APRIL 2006 − REVISED MARCH 2011

19

POST OFFICE BOX 655303

•

DALLAS, TEXAS 75265

LCD_A drive with regulated charge pump

The LCD_A driver generates the segment and common signals required to drive an LCD display. The LCD_A
controller has dedicated data memory to hold segment drive information. Common and segment signals are
generated as defined by the mode. Static, 2-MUX, 3-MUX, and 4-MUX LCDs are supported by this peripheral.
The module can provide a LCD voltage independent of the supply voltage with its integrated charge pump.
Furthermore it is possible to control the level of the LCD voltage and, thus, contrast by software.

watchdog timer (WDT+)

The primary function of the WDT+ module is to perform a controlled system restart after a software problem
occurs. If the selected time interval expires, a system reset is generated. If the watchdog function is not needed
in an application, the module can be configured as an interval timer and can generate interrupts at selected time
intervals.

universal serial communication interface (USCI)

The USCI modules are used for serial data communication. The USCI module supports synchronous
communication protocols like SPI (3 or 4 pin), I2C and asynchronous communication protocols like UART,
enhanced UART with automatic baudrate detection, and IrDA.

The USCI_A0 module provides support for SPI (3 or 4 pin), UART, enhanced UART and IrDA.

The USCI_B0 module provides support for SPI (3 or 4 pin) and I2C.

USART1

The hardware universal synchronous/asynchronous receive transmit (USART) peripheral module is used for
serial data communication. The USART supports synchronous SPI (3 or 4 pin) and asynchronous UART
communication protocols, using double-buffered transmit and receive channels.

hardware multiplier

The multiplication operation is supported by a dedicated peripheral module. The module performs 16

16,

16

8, 8

16, and 8

8 bit operations. The module is capable of supporting signed and unsigned multiplication,

as well as signed and unsigned multiply and accumulate operations. The result of an operation can be accessed
immediately after the operands have been loaded into the peripheral registers. No additional clock cycles are
required.

«
...
17
18
19
20
21
...
»

Содержание MSP430CG4616IPZ

















































































































Отзывы:

Нет отзывов

Похожие инструкции для MSP430CG4616IPZ

Бренд: udir/c Страницы: 2

Бренд: Macnaught Страницы: 20

Manual Tower Controller

Бренд: Vinpower Страницы: 2

Бренд: ReelCraft Страницы: 2

Бренд: Absco Страницы: 22

Бренд: Summer Страницы: 12

Бренд: Ingalls Engineering Co., Inc. Страницы: 3

Бренд: Sanotechnik Страницы: 26

Бренд: First Alert Страницы: 44

Бренд: Coan Racing Страницы: 3

Бренд: MAGIMIX Страницы: 7

ANOFRAME ROUND WITH WINDOW MOUNTS

Бренд: ROSE DISPLAYS Страницы: 2

Бренд: Hydac Страницы: 60

Бренд: Volvo Trucks Страницы: 52

Бренд: Kinman Страницы: 2

Бренд: RFL Electronics Страницы: 553

Бренд: D'Addario Страницы: 15

Бренд: Daewoo Страницы: 261

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды