Texas Instruments LMK03328EVM, Руководство пользователя

Страница: 43 / 57

www.ti.com
Example Performance Measurements
10 Example Performance Measurements
RMS Jitter and phase noise measurements were taken on the output clocks measured using Soft Pin
Mode, EEPROM Page 5 with the on-board 50-MHz crystal as the PLL reference input. The differential
output clocks were measured using a balun to a Keysight/Agilent E5052B. Some phase noise plots are
provided below.
Table 7. Output RMS Jitter Summary – Soft Pin Mode, EEPROM Page 5
RMS Jitter (fs), 12k-20M RMS Jitter (fs), 12k-20M
Output Output Frequency / Type Reference Plot
band, spurs off band, spurs on
OUT0 156.25 MHz LVPECL 103 116 Figure 19
OUT1 156.25 MHz LVPECL 104 128
OUT2 125 MHz LVPECL 104 130
OUT3 125 MHz LVPECL 102 114 Figure 20
OUT4 133.33 MHz LVPECL 98 132
OUT5 133.33 MHz LVPECL 98 120 Figure 21
OUT6 100 MHz LVPECL 136 143
OUT7 100 MHz LVPECL 134 143 Figure 22
Figure 19. Soft Pin Mode, EEPROM Page 5, OUT0 – 156.25 MHz LVPECL (Spurs On)
43 SNAU184 – August 2015 LMK03328EVM User’s Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated