FPC401 EVM GUI Description and Setup
15
SNLU222B – December 2016 – Revised September 2019
Copyright © 2016–2019, Texas Instruments Incorporated
FPC401 and FPC402 Evaluation Module (EVM) User’s Guide
2.10 Scheduled Write Configuration
To perform a scheduled write to one or more downstream ports, select the
Scheduled Write
tab. Select
the port number, device address, register offset address, and write value and click
EXECUTE
SCHEDULED WRITE
. This will issue a write to the selected port, and may be broadcasted to write to
multiple ports across multiple FPC instances. The CONFIGURE COMMON SCHEDULED WRITE section
works similarly, but the user may also select which of the ports to be written, allowing writing to all four
local ports simultaneously.
Figure 17. FPC401 GUI – Scheduled Write Control
