FPC401 EVM GUI Description and Setup
11
SNLU222B – December 2016 – Revised September 2019
Copyright © 2016–2019, Texas Instruments Incorporated
FPC401 and FPC402 Evaluation Module (EVM) User’s Guide
2.6
Interrupt Configuration and Monitoring
To configure the port's interrupts, select the
Input Pin Interrupt
tab. To enable input pin interrupts, select
the port, input trigger source, and trigger edge. Click
SET
to configure. To check and clear the status of all
of the interrupts of the selected port, click
UPDATE AND CLEAR
. Some of these interrupts are configured
in other sections.
To enable the SDA and SCL instances stuck at 0 interrupts, click
SDA STUCK ENABLE
and
SCL STUCK
ENABLE
buttons. These buttons enables the interrupts for all ports of the selected instance. To clear
these interrupts, a port reset must be issued using the
RESET PORT
button, highlighted in
Figure 11. FPC401 GUI – Interrupt Control
Figure 12. FPC401 GUI – Port Reset
