Typical Connection and Test Equipment
29
SNLU205 – March 2016
Copyright © 2016, Texas Instruments Incorporated
DS90UB921-Q1EVM User's Guide
1.14 Typical Connection and Test Equipment
The following is a list of typical test equipment that may be used to generate signals for the Serializer
inputs:
1. Digital Video Source – for generation of specific display timing such as Digital Video Processor or
Graphics Controller (GPU).
2. Any other signal generator / video source - This video generator may be used for video signal sources.
3. Any other signal / video generator that provides the correct input levels as specified in the datasheet.
The picture below shows a typical test set up using a Graphics Controller and display.
Figure 1-23. Typical Test Setup for Video Application
The picture below shows a typical test set up using a video generator and logic analyzer.
Figure 1-24. Typical Test Setup for Evaluation
