Out-of-the-Box Quick-Start Guide
11
SLOU476 – August 2017
Copyright © 2017, Texas Instruments Incorporated
DRV10987 Evaluation Module User's Guide
displays the error message as shown in
. Confirm the hardware connection.
Retry the initialization or click the
Demo Mode
button to operate in demo mode.
Figure 9. Initial GUI Screen
•
If the
Demo Mode
button was clicked, the GUI displays the
Basic Settings
as shown in
. Click the
Demo Mode
checkbox to deselect the demo mode communication
and proceed to
.
•
If the
Retry
button was selected, the GUI displays the screen as shown in
directly after
.
Figure 10. GUI in Demo Mode
Step 11. The status bar displays
HARDWARE CONNECTED
and the bar turns green, indicating that
the GUI is communicating with the device. Click the
Enable Configure
to change this button
from the red to green (see
