Texas Instruments DIYAMP-SOT23-EVM, Руководство пользователя, Страница: 4 / 35

Hardware Setup
www.ti.com
4 SBOU191 – July 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
DIYAMP-SOT23-EVM
2 Hardware Setup
Assembly of the DIYAMP-SOT23-EVM involves identifying and breaking out the desired circuit
configuration from the EVM, soldering components, header pins, and inputs and outputs connections. This
section presents the details of these procedures.
2.1 EVM Circuit Locations
Figure 1 and Table 2 map the location of each circuit configuration on the EVM. Figure 1 labels each
circuit configuration with a letter ranging from A to L. Table 2 matches the circuit configuration to a letter in
Figure 1 and also provides the name of each individual circuit written in silk screen on the EVM.
Figure 1. Location of Circuit Configurations
Table 2. Location of Circuit Legend
Circuit Name Silk Screen Label
Letter in
Figure 1
Single-supply multiple feedback filter Single-Supply MFB Filter A
Single-supply Sallen Key filter Single-Supply SK Filter B
Single-supply non-inverting amplifier Single-Supply Non-Inverting Amp C
Single-supply inverting amplifier Single-Supply Inverting Amp D
Difference amplifier Difference Amp E
Dual-supply multiple feedback filter MFB Filter F
Dual-supply Sallen Key filter SK Filter G
Inverting comparator Inverting Comparator H
Non-inverting comparator Non-Inverting Comparator I
R
iso
with dual feedback Riso Dual Feedback J
Dual-supply non-inverting amplifier Non-Inverting Amp K
Dual-supply inverting amplifier Inverting Amp L