Texas Instruments DIYAMP-SOT23-EVM, Руководство пользователя, Страница: 18 / 35

Schematic and PCB Layout
www.ti.com
18 SBOU191 – July 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
DIYAMP-SOT23-EVM
The dual-supply, Sallen-Key filter can be configured as a low-pass filter, high-pass filter, or band-pass
filter based on the component selection of Z1 through Z5.
Table 6 displays the type of passive component
that should be chosen for Z1 through Z5 for each filter configuration.
Table 6. Sallen-Key Filter Component Type Selection
Pass-Band
Filter Type
Type of
Component (Z1)
Type of
Component (Z2)
Type of
Component (Z3)
Type of
Component (Z4)
Type of
Component (Z5)
Low Pass R1 R2 C3 C4 Not populated
High Pass C1 C2 R3 R4 Not populated
Band Pass R1 C2 R3 R4 C5
For additional guidance in designing a filter, download the FilterPro active filter design software.
The PCB layout of the top layer of the dual-supply, Sallen-Key filter circuit configuration is displayed in
Figure 28 .
Figure 28. Dual-Supply, Sallen-Key Top Layer
The PCB layout of the bottom layer of the dual-supply, Sallen-Key filter circuit configuration is displayed in
Figure 29 .
Figure 29. Dual-Supply, Sallen-Key Bottom Layer