Quick Start Guide
www.ti.com
2
Quick Start Guide
This section guides the user through the EVM test procedure to obtain a valid data capture from the
ADS54J60EVM using the TSW14J56EVM capture card. This should be the starting point for all
evaluations.
2.1
Software Installation
The proper software must be installed before beginning evaluation. See
Section 1.2
for a list of the
required software. The
References
section of this document contains links to find the software on the TI
website.
Important:
The software must be installed before connecting the ADS54J60EVM and TSW14J56 to the
computer for the first time.
2.1.1
ADS54Jxx EVM GUI Installation
The ADS54Jxx EVM GUI is used to control the ADS54J60EVM. It must be used to properly configure the
devices on the EVM.
1. Download the ADS54Jxx EVM GUI from the TI website. The
References
section of this document
contains links to find the software on the TI website.
2. Extract the files from the zip file.
3. Run
setup.exe
and follow the installation prompts.
2.1.2
High Speed Data Converter Pro GUI Installation
High Speed Data Converter Pro (HSDC Pro) is used to control the TSW14J56EVM and analyze the
captured data. Please see the HSDC Pro user’s guide (
SLWU087
) for more information.
1. Download HSDC Pro from the TI website. The
References
section of this document contains the link to
find the software on the TI website.
2. Extract the files from the zip file.
3. Run
setup.exe
and follow the installation prompts.
4
ADS54J60EVM
SLAU629A – April 2015 – Revised January 2016
Submit Documentation Feedback
Copyright © 2015–2016, Texas Instruments Incorporated