266
Chapter 20: A to Z Function and Instruction Reference
20ATOZ.DOC TI-86, Chap 20, US English Bob Fedorisko Revised: 02/13/01 2:42 PM Printed: 02/13/01 3:05 PM Page 266 of 118
Alphabetical Listing of Operations
All the operations in this section are included in the
CATALOG
. Non-alphabetic operations
(such as
+
,
!
, and
>
) are listed at the end of the
CATALOG
. In this A to Z Reference, however,
these operations are listed under their alphabetic equivalent (such as addition, factorial,
and greater than).
You always can use the
CATALOG
to select an operation and paste it to the home screen or
to a command line in the program editor. You also can use the specific keystrokes, menus,
or screens listed in this section.
†
Indicates menus or screens that paste the operation’s name only if you are in the
program editor. In most cases, you can use these menus or screens from the home
screen to perform the operation interactively, without pasting the name.
‡
Indicates menus or screens that
are valid only from the program
editor’s main menu. From the
home screen, you cannot use
these menus or screens to select
an operation.
The syntax for some operations uses brackets [ ] to indicate optional arguments. If you use
an optional argument, do not enter the brackets.
program editor’s
main menu