Tews Technologies TPMC371-10, Руководство пользователя

Страница: 15 / 22

TPMC371 User Manual Issue 1.1.5 Page 15 of 22
4.2 Configuration EEPROM
After power-on or PCI reset, the XR17D158 loads initial configuration register data from the on board
configuration EEPROM.
The configuration EEPROM contains the following configuration data:
•
Vendor ID
•
Vendor Device ID
•
SubSystem Vendor ID
•
SubSystem Device ID
See the XR17D158 Manual for more information.
Address Configuration Register
Configuration
Register Offset Value
0x00 Vendor ID 0x02 0x1498
0x01 Device ID 0x00 0x0173
0x02 Subsystem Vendor ID 0x2E 0x1498
0x03 Subsystem ID 0x2C s.b.
Table 4-2 : Configuration EEPROM TPMC371-xx
Subsystem ID Value (Offset 0x0C): TPMC371-10 0x000A
TPMC371-11 0x000B
TPMC371-12 0x000C
The words following the configuration data contain:
•
The module version and revision
•
The UART clock frequency in Hz
•
The physical interface attached to the serial channels
•
The maximal baud rate of the transceivers in bps
•
The supported control signals of the serial channels
For the physical interfaces and the control signals applies: Bit 7 represents UART channel 7 and bit 0
represents UART channel 0. The appropriate bit is set to ‘1’ for each UART channel attached to the
physical interface represented by the word. Bit 15 to bit 8 are always ‘0’.