Tevion DIGITAL MINI SATELLITE SYSTEM, Руководство пользователя

Страница: 28 / 88

Helpline No. UK/Northern Ireland 01422 263270 Rep. Ireland 1890 812049 Helpline No. UK/Northern Ireland 01422 263270 Rep. Ireland 1890 812049
28
Helpline No. UK/Northern Ireland 01422 263270 Rep. Ireland 1890 812049
30
Installation on a crate
Ö
First of all, rotate the antenna by 180° so that the LNB will face
away from the antenna base.
Ö Now, flap down the antenna base by 90° using the articulation.
Ö Then fix the lateral rods with the wing nuts at the left and right
side of the base to get the required stability. The cavities of the
lateral rods must face towards the inside of the base. Now, the
lateral rods rest directly on the base. The spring ring and the plain
washer must be placed between the lateral rods and the wing
nuts. Here, the plain washer rests on the respective lateral rod.
The spring ring must be placed between the plain washer and the
wing nut.
Ö
For fixing the base on the crate, place the U bracket on the crate
as shown in the picture. Now, lead the U bracket through the two
corresponding holes of the base. Tighten the wing nuts uniformly.
Ö
After the cabling of the satellite system the antenna can be
directed to the desired satellite. For this, please proceed as
described in the section
"
Direction of the antenna
"
on page 3
7
.
L
The maximum diameter of the bar at which the base is fixed
must not exceed 60mm.