• IP 42 CR
11
Adjusting the balance
Balance means the balance of volume between the right
and left loudspeakers .
1 . Press button
47
"Balance" .
The letter "L" appears on the display panel
5
, together
with the preset value for the left channel within a range
of –10 db to +10 db .
2 . Change the volume level for the left channel to suit
your own taste, using dial
1
"Volume" or the buttons
44
"Vol –" and
30
"Vol +" .
3 . Press button
47
"Balance" .
The letter "R" appears on the display panel
5
, together
with the preset value for the right channel within a
range of –10 db to +10 db .
4 . Change the volume level for the right channel to suit
your own taste, using dial
1
"Volume" or the buttons
44
"Vol –" and
30
"Vol +" .
5 . If three seconds pass without buttons being pressed,
the unit switches back to standard mode .
Radio mode
Select one of the two radio reception ranges as your
source (see previous page):
FM
– to receive mono and stereo stations from 87 .5 to
108 MHz, RDS mode possible
AM
– to receive mono stations from 522 to 1,629 kHz
20 stations can be stored in each range (see below) .
Selecting radio stations
Button
39
"Auto" is used to switch between manual and
automatic search mode . When you press the button,
the text "AUTO" or "MANUAL" appears briefly on the
display panel
5
.
You can set the reception frequency using buttons
15
and
42
"/–":
•
Automatic
: When the button is pressed, the unit
searches the waveband in the desired direction until it
finds a station with a sufficiently strong signal .
•
Manual
: Each time the button is pressed, the frequency
is increased or decreased by one step (FM: 0 .05 MHz,
AM: 9 kHz) .
1
5
15
30
42
44
47
39
