Teufel 22.610.010.00, Руководство пользователя

Страница: 14 / 20

3
5
6
4
EN-6
Osteo-Comfort User Manual Osteo-Comfort User Manual
EN
FR
ES
IT
DE
EN
FR
ES
IT
DE
5.
Open the hook-and-loop fastening of the
circular orthosis. Put your arms through
the shoulder straps, so the orthosis sits
on your back like a backpack. (Fig. 5)
The length of the shoulder straps can
be adjusted in two directions. Adjust
the length of the strap which is going
upwards first. If it is necessary to shor-
ten the strap, lead the strap end towards
the shoulder pad, and attach it to the
strap, using the hook and loop fastener.
6.
Pull both ends of the circular orthosis
downward/forward. Now close the hook-
and-loop fastening of the circular orthosis
in front of the belly. (Fig. 6)
3.
The degree to which the upper body
is straightened can be adjusted by
repositioning the strap of the lumbar
orthosis. Light straightening effect =
front buttonhole / strong straightening
effect = back buttonhole (Fig. 3)
4.
To make the orthosis easier to use for
your patient, place the enclosed piece of
hook and loop fastener onto the center
of the reclinator, about 5 cm above the
bottom end of the zipper. Then attach
the two ends to the inside of the left
and the right side of the basic lumbar
component. The basic component will
now be held in place when the orthosis
is donned, and putting the orthosis on
will be a lot easier. (Fig. 4)