CHAPTER 4
OPERATION
4-11
DN-109AT, DN-119AT, DN-129AT and DN-189AT display series
4.5.
Ethernet option
Ethernet options allows a new step in this displays type because it allows to connect displays
using the same LAN in the installation, syncing them through the SNTP and providing a new user
interface through the Web.
4.5.1.
The first connection
There are several ways for accessing the display on the first time it’s connected to the network.
One of the ways is changing the IP address through parameters seen before
If the IP 192.168.1.100 (the default IP of the display) is in the range of your LAN, the display can be
accessed typing the IP in the URL bar in your favourite browser.
In case there is more than one display in the LAN or the default IP of the display is out of the IP range
of you LAN, it is recommende
d to use the PC program “Display Discoverer”, downloadable from the
web
www.lartet.com
. In this program, the displays connected to the LAN are displayed, as well as their
IP addresses, their MAC addresses (all MAC are 00:04:A3:xx:xx:xx) and its name. The default name
of the display is its serial number. This name can be changed in the Ethernet tab of the web server of
the display. If a display is selected, by clicking “identify Display”, the selected display will flash for 3
seconds.
The first row shows the IP of the PC which is searching the displays and the second row a display we
just have bought. As it is shown, the display has serial number 17061234 and the default IP is out of
the range of the LAN. To change the IP address to a suitable one for our LAN, select the display and
click the button “Change IP”. When clicking this, a new window is opened where a new IP address can
be tipped.
