4-10
OPERATION
CHAPTER 4
DN-109AT, DN-119AT, DN-129AT and DN-189AT display series
4.4.4.
Parameters to define the colour.
To define the colour the 2 alarms are used.
The following parameters are used to define colours.
Colour if internal bits are OFF. To change the colour push * key. Upon pressing
+ the next parameter is shown.
Colour if internal bit
r1
is ON. To change the colour push * key. Upon pr
the next parameter is shown.
Colour if internal bit
r2
is ON. To change the colour push * key. Upon pr
the next parameter is shown.
Colour if internal bits
r1
and
r2
are ON. To change the colour push * key. Upon
pr the next parameter is shown.
4.4.5.
Characteristics of the relay output option.
SPDT contact.
Maximum current:
Resistive load ..................................... 5A
Inductive load ...................................... 5A
Maximum voltage: .................................... 60V AC/DC
4.4.6.
Wiring the relay output
J3
1= Relay 1 - NC
2= Relay 1 - NO
3= Relay 1 - C
4= Relay 2 - NC
5= Relay 2 - NO
6= Relay 2 - C
J3
RELAY 2
RELAY 1
6 5 4 3 2 1
