TESY MC 2011, Руководство по установке, эксплуатации и хранению

Страница: 3 / 36

Usage and Storage Instructions
3
EN
English
•
Do not cover the appliance. If the appliance gets
covered, there is risk of overheating.
•
If the appliance is damaged or does not work
properly, stop it and do not repair it yourself. For any
kind of repairs call for assistance after-sale service
centre. This is the place where you will have your
broken part replaced with an original one. Non-
adherence to this instruction will compromise the
appliance safety.
•
If you decide to stop using such kind of appliance,
it is advisable to render it unusable by cutting its
power cord after disconnecting it from the mains.
It is advisable all possible dangers related to the
appliance to be prevented, especially in relation to
children that may play with out-of-use appliances.
•
Never keep the appliance unnecessarily switched
on. Disconnect it from the power socket when you
do not intend to use it for a long period of time.
•
The appliance should not be positioned right under
a power socket!
•
Warning : Do not use this appliance with a
programming device, counter or any other device
which can automatically switch it on, because if the
appliance is covered or improperly positioned this
may cause fire.
•
Position the power cord in such a way that it does
not obstruct the free movement of people and
cannot be stepped on! Use only approved extension
cords which are suitable for this appliance, i.e. have
got a conformity sign!
•
Never move the appliance by pulling its power cord
and do not use the power cord for carrying objects!
•
Do not bend the power cord and do not stretch it
over sharp edges, do not position it over hot plates
or open flames!
PACKING
•
After unpacking the appliance, check if all its
elements are included in the packing and that it has
not been damaged during transportation! In case
damage or incomplete delivery is found, contact
your authorized retailer!
•
Do not throw away the original packing! It could
be used for storage and transportation purposes in
order to avoid damages during transportation!
•
Disposal of packing materials should be done in
the appropriate way! Children should be prevented
from playing with polyethylene bags!
INSTALLATION AND OPERATIONS INSTRUCTIONS
Before operating your panel heater:
Please check if the two sets of castor wheels are
properly attached to each foot of the appliance by the
suitable screws.
•
As an alternative you may mount the appliance
onto a wall by following the instructions below:
Important: Before drilling holes into the wall,
check if there are not any cables passing nearby.
1. Dismount the feet with castor-wheels off the
appliance.
2.
Drill into the wall holes with the proper size.
3.
Put the plastic dowels into the wall.
4.
Put the screws through the openings of wall holders
and then tighten the screws.
5. Hang the main body onto the wall with its hooks.
Set the panel heater into correct working position
before connecting it to the electric system.
•
The appliance is equipped with a power selection
switch. „I” stands for 1000W, ‘’II” stands for 2000W.
The total maximum power when both power levels
are on is 2000W.