Operation manual Pneumator
∙
Testo Industrial Services
∙
Version 1.4
∙
2019
∙
Page 4
1.
Introduction and safety instructions
Dear Sir or Madam,
Thank you for buying a Pneumator from Testo industrial services GmbH.
We are sure, that this instrument will be of benefit to you and your work for a long
time.
Please read the operation manual carefully and get acquainted with the handling of
the Pneumator before you start operating.
Should a problem occur, which you are not able to solve yourself, please contact our
service department or your salesman. We will make every effort to help you as fast
and competent as possible.
Attention:
- The Pneumator is supplied via a power supply with 20 to 26 VDC at an
amperage of 1 A.
Never touch parts under Voltage
!
- The inserted reference sensor has an overload protection. However, please
note that the max. application of pressure is never exceeded, as otherwise
lasting destruction could occur:
o
Pneumators 1 / 10 / 100 hPa
5-times overload stability
o
Pneumators 1000 hPa
2-times overload stability
- Please note that a negative pressure at the minus connection may never
exceed 10% of the measuring range
- The Pneumator contains an accumulator (lithium manganese cells). This
should be unloaded occasionally, in order to optimize the performance.
- Concerning
transport,
the
Pneumator must be packed shockproof in order to
avoid damages!
- Please leave the device closed.
When opening the device the warranty
expires.
