TESTO 0519.0816, Руководство по эксплуатации

Страница: 12 / 27

Operation manual Pneumator ∙ Testo Industrial Services ∙ Version 1.4 ∙ 2019 ∙ Page 12

Submenu „Steps down“: Define requested number of
descending pressure steps (buttons UP, DOWN, 0%, 100%,
confirm with OK).
 Submenu „Configuration 1“: By pressing OK, a further menu
overview is being opened. The meaning of the variables is also
clarified in the following illustration.

Submenu „Cycles“: Here is being defined how often the
pressure sequence shall be repeated (buttons UP,
DOWN, 0%, 100%, confirm with OK).

Submenu „T Start“: Initial waiting time for the venting
(buttons UP, DOWN, 0%, 100%, confirm withOK),
compare illustration and chart

Submenu „T Stop“: Waiting time at maximum pressure
(buttons UP, DOWN, 0%, 100%, confirm with OK),
compare illustration and chart

Submenu „T Hold“: Holding time of each adjusted
pressure stage (buttons UP, DOWN, 0%, 100%, confirm
with OK), compare illustration and chart

Submenu „T Pause“: Pause time between 2 cycles
(buttons UP, DOWN, 0%, 100%, confirm with OK),
compare illustration and chart

Submenu „Auto Zero“: Selection (buttons UP / DOWN,
confirm with OK), whether an automatically zero-ing shall
be driven as phase 4. ON = yes, OFF = no.
o
Leave the menu by pressing the MENU button several times